6916 VVC3 NSK

Part Number: 6916 VVC3

Brand: NSK

Bearing Type: Thin section ball bearing with NBR contact seals.

Dimension(s):
Inside Diameter (d) = 80 mm
Outside Diameter (D) = 110 mm
Width (B) = 16 mm
Radius (r₁,r₂ min) = 1 mm

Load Rating(s):
Basic Dynamic Load Rating - kN = 25.1
Basic Static Load Rating - kN = 20.4
Fatigue Load Limit - kN (Pᵤ) = 1.02

Abutment and Fillet Dimension(s):
dₐ min = 85 mm
dₐ max = 89 mm
Dₐ max = 105 mm
rₐ max = 1 mm

Clearance: C3 (Greater than normal)

Speed Limitation(s):
Reference Speed (r/min) = Not Applicable
Limiting Speed (r/min) = 3400

Calculation Factors:
Mean Radial Load - kN (Kr) = 0.02
Payload Factor (f₀) = 14

Alternative Part Number(s):
61916 2RS1 C3, 61916 2RS C3, 61916-2RS/C3

More Information:
Deep groove ball bearings are probably the most popular and widely used type if bearing in the world. This 2RS type bearing is manufactured with NBR rubber seals, pre-packed with grease lubricant. The large diameter sealed type deep groove ball bearings are generally used in applications where they can be introduced to dust, moisture or dirt such as large motors, extruders and pumps. Due to the sealing properties, the NBR sealed bearings are a very popular choice for many industries and applications, however, due to the contact between seal and inner ring, starting and running torque values are increased. A 2RZ (non-contact) and 2RSL (low-friction) sealed version is available where starting and running torque is critical. This deep groove ball bearing 6916 VVC3 NSK has an inside diameter of 80 mm, an outside diameter of 110 mm, and a width of 16 mm.